BPM Finder

Drop in an audio file and get its BPM. The analysis runs on your device, so the song never leaves your browser.

Drop an audio file to find its BPM

MP3, WAV, M4A, FLAC or OGG

Your file never leaves your browser — the analysis runs on your device and nothing is uploaded.

Make your music video, from $29

Got the tempo? Melodious turns the whole track into a music video — See how

What the BPM finder returns on real tracks

Five tracks, each run through the same detector that sits above. A confident reading and a middling one look different, and the page shows you which you have.

High confidence

  • Track 1 (0:38): 120 BPM, high confidence (1.00)
  • Track 2 (0:38): 120 BPM, high confidence (0.78)

Medium confidence

  • Track 3 (1:20): 128 BPM, medium confidence (0.69)
  • Track 4 (2:57): 140 BPM, medium confidence (0.47)
  • Track 5 (3:12): 150 BPM, medium confidence (0.49)

Measured by this page's detectors on a 48 kHz mono decode, the rate most browsers decode at, of five tracks from our own test library. These are what the tool returned, not verified answers, and the key reading in particular can change with the decode rate; the confidence labels say how far to trust each one.

How to find the BPM of a song

Drop the audio file onto the tool above. It decodes the file, measures how often the sound jumps in energy and finds the interval at which that pattern repeats. That interval becomes beats per minute, and the number appears with a confidence label. Nothing is uploaded, nothing needs an account, and you can check as many files as you like.

A clear kick drum or a steady strum gives the cleanest result. Percussion-free music is harder, and the label tells you when that has happened.

Six tempo and key tools, and which one to open

These six pages run in your browser and share a small set of tools: a tempo detector, a key detector, a tap timer and a wheel. They are separate pages because people arrive with different things in hand, and the right page depends on what you have.

Tap tempo: open it when you have no file, only a song playing somewhere or in your head.

Song key finder: open it when you want the key of a track and the reasons behind the answer.

BPM and key finder: open it when you want tempo and key from one file in one go.

Tempo finder: open it when you read tempo as a word such as Allegro, or want typical BPM by genre.

Camelot wheel: open it when you already know a key and want to know what mixes with it.

What the detector does, step by step

The page works from a loudness curve rather than from notes. It splits the track into short frames, measures the energy in each, smooths the curve slightly and keeps the places where energy rises sharply. Those rises are the onsets: drum hits, plucks, chord changes.

It then slides a copy of that curve against itself. When the copy lines up with the original, the shift is a repeating interval. The strongest alignment inside the 60 to 180 BPM window wins. Two corrections follow. A reading under 80 is doubled, because a lot of songs get caught at half speed. And a reading within three of a common tempo, like 100, 120, 128 or 140, is snapped to it, which is why house tracks come back as 128 and not 127.6.

Half time and double time, the one error to expect

If a result is wrong, it is nearly always wrong by a factor of two. A beat every half second is 120 BPM, and counting every second beat gives 60. Both describe the same audio. Trap and drum and bass are the usual cases: written fast, felt slow, and talked about at either number.

When the number looks half or double what you hear, trust your count. Tap along on the tap tempo page and compare. If the tap number and the file number differ by exactly two, you have found a half-time ambiguity and either number is defensible. Pick the one your mix, your click track or your editor expects.

What this BPM finder does not do

It returns one tempo for the whole file. A song that speeds up, slows down or changes tempo at the bridge will get a single figure that describes the strongest part, and it cannot draw a tempo map. It will not read music outside 60 to 180 without folding it into that range. It does not detect the downbeat or the time signature, and it does not label sections.

Live drumming, rubato piano and ambient pads can come back as estimated. That is the tool being honest about a weak signal, not a bug to report.

From a BPM to a music video

Tempo decides how fast a video can cut: at 128 BPM a bar lasts about 1.9 seconds, so a scene change every one or two bars lands on the beat. When you take the track to Melodious, the studio reads the tempo and the section boundaries from the file itself and plans the storyboard against them, and a tempo the tool is reasonably sure of travels with you into the studio. The video is a paid product, separate from this page. The guide on preparing a song before you generate a video explains which export to send, and the AI music video generator page shows what comes out.

Frequently asked questions

How do I find the BPM of a song on my computer?

Drag the audio file onto the tool above, or press the button and pick it. The page decodes the file in your browser, measures the spacing of the beats and shows a number with a confidence label, usually within a few seconds. There is no upload step and no account.

Why does the BPM finder say 128 when the artist says 64?

Both are correct counts of the same music. A pulse every 0.47 seconds is 128 beats a minute, and counting every second pulse gives 64. Producers of slower styles often write the half-time number, listeners count the faster one, and a detector has to pick one. This tool prefers the faster reading when the slower one would fall under 80, because most recorded music sits between 80 and 180.

What does the confidence label on a BPM reading mean?

It measures how regularly the track's loudness pattern repeats at the winning interval, on a scale from 0 to 1. Above 0.7 is high, above 0.4 is medium, and anything at or under 0.4 is estimated, a best guess you should check by ear or by tapping. The label describes the measurement. It does not say whether the tempo is musically right, and a half-time answer can still score high.

Can the BPM finder read a song playing on Spotify or YouTube?

No. It needs an audio file it can open, and streaming services do not hand one over. If the song is playing in another tab or on a speaker, use the tap tempo page and tap along instead. If you own the file, drop it in here.

Which audio formats can the BPM finder open?

MP3, WAV, M4A, FLAC and OGG, as far as your browser can decode them. Support comes from the browser itself, so a file Chrome opens may be refused by Safari. Converting to WAV or MP3 fixes a refusal. The size limit is 100 MB.

What range of BPM can it return?

From 60 to 180. The detector only searches that window, then applies two corrections: a reading below 80 is doubled, and a reading within three of a common tempo such as 120 or 128 is snapped to it. A song at 200 BPM tends to come back as 100, and a very slow ballad at 55 tends to come back near 110.

Is the BPM from this tool the same as the one in my DAW?

For a track with a steady grid, usually within a beat. A DAW shows the tempo you set, which is exact by definition. This tool measures finished audio, so it reports what the recording does. Where a live drummer drifts or a tempo changes, the two will differ and the DAW number describes your intent, not the recording.

Does the BPM finder upload my song anywhere?

No. The file is read and analysed on your device. You can check in your browser's network tab while it runs, or switch off your connection after the page loads and it still works.

You have the tempo. Want the video?

Attach the track and describe what you want. An AI director plans the storyboard scene by scene and renders it to your audio.

Start your video

More tools: Tap tempo · Song key finder · BPM and key finder · Tempo finder · Camelot wheel · Audio visualizer · MP3 to video

We use analytics tools (GTM, Plausible, PostHog) to improve Melodious AI. Manage this in Privacy Settings anytime.